It’s time for a shift when it comes to cleaning hospital beds.

COVID-19, as we all know, has put a significant demand on hospital resources, particularly with increased bed occupancy levels. According to the Nuffield Trust, critical care bed occupancy levels were at 148 percent on January 24, 2021, compared to the number of available beds on the same day in January 2020.

Not only has expanding the number of beds produced staffing issues, but it has also made it more difficult to keep hospital bed brampton clean, thereby raising the risk of infection transmission.

It’s a major job to keep mattresses clean and safe to use. However, we believe we have found a solution — The Hospital Bed Rental Inc.

In this post, we’ll go over why infection prevention is so important, how hospital beds are cleaned now, and how the Bed Washing System may improve the cleaning process to minimise infection transmission in hospitals.

Why is it critical to prevent infection in hospital beds?

In any hospital, beds and mattresses are among the most prevalent pieces of equipment. Every patient need his or her own bed. They’re also among the most difficult to keep clean — anyone who has worked in the medical field can attest to that!

Mattresses are constantly in contact with the patient’s skin, which is a breeding ground for germs (some harmless, some less so). A mattress may also be exposed to body fluids as a result of open wounds or incontinence.

In addition, the bed is tended to by a team of people on a daily basis. Every individual who comes into touch with a bed, from nurses altering placement to porters transferring patients about the hospital, raises the danger of cross-contamination.

Beds and mattresses must be cleaned on a regular basis, even if strong handwashing protocols are in place.

Infections related with healthcare affect 300,000 persons each year.

With this in mind, infection prevention should be a major responsibility for everybody working in a hospital.

According to NICE, 300,000 individuals in England get a healthcare-associated infection each year (HCAI). These estimates only cover NHS institutions, where HCAI was found to cost more than £1 billion per year, implying that the full scope of the problem throughout the broader healthcare industry is likely to be substantially more than the initial estimate.

WHAT EXACTLY IS HCAI?

Any infection that arises as a direct result of medical intervention, such as surgical treatment, or as a result of being in touch with a healthcare facility, such as a hospital or care home, is referred to as a healthcare-associated infection.

Hospitals strive hard to comply with infection prevention measures because to the incidence and expense of HCAI, both in terms of patient well-being and financial costs.

Individual policies may differ slightly depending on the needs of the facility. All regulations, however, will contain instructions for maintaining reusable equipment, such as hospital beds and mattresses.

What methods are used to clean hospital beds?

Almost all hospital beds and mattresses in Canada are currently hand-cleaned.

This is due to the fact that nearly all hospital beds are non-washable (IPX4). Water and chemicals cannot be used to clean them because they would destroy electrical components.

Manual cleaning entails removing the bed and wiping all headboards, siderails, and other surfaces before doing a separate mattress cleansing.

Cleaning the surface in place with detergent and water, then rinsing, is the current recommended procedure for mattress cleaning. Following that, staff must apply a chemical disinfectant with a pH permitted by the manufacturer for the required contact duration, followed by further washing.

A disinfectant’s contact time is usually approximately 5 minutes. So, dismantling a bed, cleaning it, disinfecting the mattress, drying it, and putting it back together might take 15 minutes or more.

Read our whole guide on How to Decontaminate a Mattress for more information on this issue.

IS IT TIME FOR A CHANGE?

The Coronavirus pandemic has highlighted the need for more stringent infection control, particularly when it comes to sanitising medical equipment.

Not only do the present procedures take a long time, but they also pose a higher danger of cross-contamination since cleaning employees come into close touch with each bed.

Continually relying on manual cleaning is inefficient and puts patients and employees at danger. What, on the other hand, is the alternative?

The Washing System for Beds

It’s past time for NHS and private hospitals in the UK to fully automate the washing and disinfection of beds and mattresses.

The Hospital Bed Rental Inc. is a company that rents out hospital beds.

WHERE DOES A BED WASHING SYSTEM COME FROM?

The Bed Washing Technology is an automated bed cleaning system that will revolutionise hospital bed cleaning across the country.

The technology is unique in that it cleans and disinfects using steam and precise robots.

Several automatic bed cleaning systems are already on the market. They all, however, rely on chemicals and water to clean. As a result, this is the only system that can clean IPX4 beds equipped with modern electronics.

The Bed Washing System, which can wash, disinfect, and dry beds and mattresses all in one cycle, is now in use in hospitals across Europe. We are now in a position to introduce this cutting-edge technology.

CAN YOU EXPLAIN HOW IT WORKS?

This is a really straightforward and effective approach. Chemical cleaning products are no longer required when robotics and high-temperature steam are used. Thermal disinfection is achieved instead by using steam.

The VDS can deliver a thoroughly cleaned hospital bed and mattress ready for immediate use every 6 minutes.

The following is a rundown of how it works:

INTRODUCTION – The bed is scanned, recognised, and double-checked. This instructs the Bed Washing System to begin the proper, custom-tailored cleaning programme for that particular bed.

It also checks whether the bed is needed for maintenance or inspection at the same time, thanks to the integrated track & trace system!

CLEANING – The mattress is lifted from the bed so that both can be cleaned separately. All of the components of the bed and mattress are cleaned with steam at >90°C utilising precision robots. Cleaning is done with the aid of a custom-made software, which ensures that every surface is cleaned properly.

DRYING – The mattress is lowered back into its original position on the bed. Both are then dried quickly using compressed air and forced ventilation.

OUTPUT – The bed may be made up and utilised as soon as the cycle is finished.

1 – Unit of Input

2 – Scanning of the Bed

3 – Lifting the Mattress (Lift Up)

4 – Cleaning Robots

5- Cleaning your mattress 

6- Mattress Lift No. 

7- Output Unit

HOW DOES IT EXCEED MANUAL CLEANING?

You receive an automated and approved washing and disinfection system with the Bed Washing System, which takes hygiene processes to the next level.

For hospitals, there are three major advantages:

HCAIs are less likely to occur.

In hospitals, infection transmission is a persistent worry. Cleaning beds and mattresses by hand, as we’ve seen, poses a danger of cross-contamination.

The Bed Washing System eliminates the need for human interaction while washing. A minimum log> 5 decrease of microorganisms validates cleanliness standards in an automated system. This indicates that if a surface has 100,000 harmful bacteria, a 5-log reduction would reduce the number of germs to one.

1. You’ll save time and money by reducing the number of people on your team.

Bed Washing System is unusual in that it does not require the use of chemical cleaning agents, as previously stated. It can now clean all hospital beds, including the standard IPX4 beds found in 98 percent of UK hospitals.

It is more efficient to use a single method to clean all of the beds. Cleaning training takes up less time in the beginning. Furthermore, each individual bed takes only 6 minutes to prepare, as opposed to 15 minutes or more!

There is minimal physical strain for employees because all mattress handling is mechanised, allowing them to focus on other elements of patient care.

Cost-cutting

Naturally, lowering the number of HCAIs and freeing up staff time will save hospitals millions of dollars over time.

The Bed Washing System, on the other hand, offers some substantial direct cleaning cost reductions.

The system uses the least amount of electricity and water on the market! In addition, hospitals can save money on chemical cleaning agents.

EACH MONTH SAVE 23 PERCENT

According to our analysis, manually cleaning 600 beds costs £30.99 per bed each month in a typical hospital. The Hospital Bed Rental Inc. brings the total down to £23.87. That’s a month-to-month savings of 23%!

OVER A TEN-YEAR PERIOD, SAVE £616,000

If you add together all of the savings we can make in different areas in a 600-bed hospital, you could save up to £616k over ten years!

When we consider the savings associated with lowering the number of illnesses spread within the hospital, that amount isn’t awful at all.

Summary Because nearly all hospital beds are non-washable (IPX4), washing hospital beds by hand has long been the standard. However, as this paper demonstrates, the existing method is inefficient and significantly increases the risk of HCAIs for patients and employees.

Those issues are readily handled with the Bed Washing System. It not only kills 99 percent of bacteria on a surface, but it is also a considerably more efficient and cost-effective approach, allowing staff to focus on patient-centered care.

If you’d like to learn more about how it works and what we have to offer, please contact us at:
Choosing the finest adjustable bed for your requirements and lifestyle is critical, but there are so many options available that it may be intimidating. We’ve compiled a list of the finest adjustable beds based on your needs, tastes, and style.

You Might Also Like

Leave a Reply